Application :

Rotary geared type Limit Switches are used on control circuit of reversing drives so as to limit their rotation / movement with a pre-determined position. Suitable for use on reversing drives, such as Hoists, Winches, rolling mills, various other mechanisms used in steel plants such as coke oven,  feeding machinery, etc.

Construction :
Rotary geared type Limit Switch is basically consists of heavy duty worm gear drive. The worm gear unit is built in a cast housing fitted on main body of Limit Switch. The cam shaft which extends from behind the gear into housing accommodates the cams adjustable actuators are fitted on the cams. These actuators strikes the contact finger of respective contacts.

Technical data :
Body Material - Aluminium die cast
Protection Degree - IP-55 Confirming to IS-13947(Part-1)1993
Gear Ratios - 1 : 48, 1 : 60
Drive - Worm Drive
Cable Entries - 3/4" Conduit
Contact Material - Double break Silver Cadmium
Rated Voltage Insulation - 500 V. A. C.
Thermal Test Current - 10 Amps.
No. of contacts - 6 maximum
Cam setting - adjustable

<<Back